Frequently Asked QuestionsFrequently Asked QuestionsFrequently Asked QuestionsFrequently Asked QuestionsThis section presents frequently asked questions and answers. To view more detailed explanations, click the hyper-links in the answer column.Question AnswerI want to easily create ver-tical or horizontal banners.You can print originals that are in landscape (or portrait) orientation automatically enlarged to fit the roll width. Thisis an easy way to create vertical or horizontal banners.(See "Printing Vertical or Horizontal Banners (Large-Format Printing).") →P.109Does this printer supportsub-ink tank system?This printer supports sub-ink tank system.Even if an ink tank becomes empty during printing, since a certain amount of ink always is stored in a sub-inktank, you can replace the ink tank while printing.(See "Replacing Ink Tanks.") →P.836I want to know how to con-figure roll cutting.You can select the cutting method by the setting of the printer driver and the setting of the printer.To cut rolls automatically after printing, set Cutting Mode of the printer to Automatic and Automatic Cutting ofthe printer driver to Yes.When using paper for which ink adhesion takes time or the print surface is easily scratched, we recommend thatyou set the Cutting Mode setting of the printer to Eject.(See "Specifying the Cutting Method for Rolls.") →P.544(See "Cutting Roll Paper After Printing.") →P.168I want to configure so thatthe roll is cut automaticallyafter waiting for the ink todry.In the printer driver, you can set the time for waiting until the ink dries.Also, you can set likewise on the printer.(See "Specifying the Ink Drying Time for Rolls.") →P.542(See "Menu Structure.") →P.643How do I print without bor-ders?When printing on rolls, you can perform borderless printing by configuring the printer driver. (when printing on cutsheets, you cannot perform borderless printing)(See "Borderless Printing on Paper of Equivalent Size.") →P.96(See "Borderless Printing by Resizing Originals to Fit the Roll Width.") →P.102(See "Borderless Printing at Actual Size.") →P.89I want to know the papertypes that can be used inthis printer.Concerning the paper that can be used in this printer, refer to the imagePROGRAF home page or the Paper Ref-erence Guide.(See "Types of Paper.") →P.524The paper type that I wantto print is not displayed onthe Display Screen.When using newly released paper, paper information must be registered on the printer and the printer driver.Download the new version of Media Information File from the imagePROGRAF website and install it.(See "Types of Paper.") →P.524What type of function iscolor calibration?Color calibration improves color consistency by compensating for slight differences in how color appears whenprinting due to individual variations or aging among the printers.We recommend color calibration in the following situations.• After initial printer installation• After Printhead replacement• When you sense a change of color compared to previously• To print with colors aligned from multiple printers• When the execution guide is displayed(See "Color Calibration Using the Printer Sensor.") →P.758Can I perform duplexprinting?This printer cannot perform duplex printing.If you use the Folded Duplex function in the Free Layout of Windows software, you can print two pages one-sided, fold them at the center and suspend them to substitute for duplex printing.(See "Prints using Folded Duplex (Windows).") →P.240I want to perform enlarge-ment printing.With the printer driver, you can specify the ratio matching the document with the paper size and width and performenlargement printing or reduction printing.(See "Resizing Originals to Match the Paper Size.") →P.68Frequently Asked Questions iPF6400User's GuideTroubleshooting Frequently Asked Questions878
