Cause Corrective ActionThe Paper Feed Slot used to load thesheet is different from the Paper Feed Slotspecified in Paper Source in the printerdriver.2. Load the paper in the Paper Feed Slot specified in the printer driver.The printer will resume printing.Change the printer driver Paper Source setting to match the Paper Feed Slot where the sheet isloaded as follows.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. In the printer driver, change the Paper Source setting to match the Paper Feed Slot wherethe sheet is loaded, and then resend the print job.Paper jam.Paper jam.Cause Corrective ActionA paper jam occurredin the printer duringprinting.1. Cut the paper on the upper side of the Paper Feed Slot.2. Press the OK button.3. Remove the jammed paper.(See "Clearing Jammed Paper (Paper Feed Slot).") →P.880(See "Clearing Jammed Roll Paper.") →P.881(See "Clearing a Jammed Sheet, Fed Manually.") →P.8844. Load the paper.(See "Loading Rolls in the Printer.") →P.534(See "Loading Sheets in the Feed Slot.") →P.5545. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button.Printing will resume, starting from the page on which the error occurred.Paper loaded askew.Paper loaded askew.Cause Corrective ActionPaper loaded crooked was detected when the paper was advanced. Press the OK button and reload the paper.(See "Loading Rolls in the Printer.") →P.534(See "Loading Sheets in the Feed Slot.")→P.554If this error recurs after you reload the roll, re-move the Roll Holder from the printer, push theroll firmly in until it touches the Roll Holderflange, and reload the Roll Holder in the print-er.(See "Loading Rolls on the Roll Holder.")→P.531Important• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in theSkew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may beaskew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is printed.Paper not aligned with right guide.Paper not aligned with right guide.Cause Corrective ActionSkew Check Lv. on the Control Panel menu is set to something other than Off and thepaper is not aligned with the guide on the right during loading.Follow these steps to reload the sheet.1. Press the OK button to clear the error.2. Reload the paper.(See "Loading Sheets in the Feed Slot.") →P.554iPF6400 Paper jam.User's GuideError Message Messages regarding paper919
