Printing procedureImportant• Always specify the same type and size of paper in the printer menu and printer driver.If the type and size do not match, an error message is displayed and the printing quality may beaffected, or printing may not be possible.• Papr Size Mismatch (→P.784)• Papr Type Mismatch (→P.784)• Paper Mismatch (→P.784)9. Send the print job.• Printing from Windows (→P.91)• Printing from Mac OS X (→P.92)• Printing from Mac OS 9 (→P.94)Start printing.Note• You can skip steps 6 and 7 if a barcode has been printed on the roll paper and you have activatedautomatic detection of the remaining roll. The paper type and amount of paper left are automaticallydetected. The barcode will automatically be cut off after it has been read.• You can skip step 7 if you have deactivated automatic detection of the remaining roll paper.• If you have deactivated width detection, you will need to enter the roll width after choosing the papertype in step 6. (→P.53)• If you select a type of paper for which width detection is Off when detection of the remaining roll paper isalso Off, you will need to advance the paper manually to the starting position for printing. (→P.126)• For details on supported sizes and types of rolls, see “Paper Sizes” or the Paper Reference Guide.(→P.113) (→P.108)• When printing on rolls after printing on sheets, if the lit paper selection lamp does not switch from theCut Sheet lamp to the Roll Media lamp, press the Feeder Selection button.Important• After changing rolls, clean the Platen. (→P.741)Basic Printing Workow 87
