Network SettingUsing RemoteUIEnter the printer’s IP address in a web browser to display the RemoteUI page. After you log on to RemoteUI fromthe page, you can check and change the status of the printer and print jobs, and congure network settings.To access RemoteUI, start the web browser and enter the following URL in the Location (or Address) box todisplay the RemoteUI page.http://“printer IP address or name”/Example: http://xxx.xxx.xxx.xxx/For details on conguring printer settings for networks, refer to the following topics.• Conguring the Printer’s TCP/IP Network Settings (→P.585)• Conguring the Printer’s AppleTalk Network Settings (→P.587)• Conguring the Printer’s NetWare Network Settings (→P.588)• Specifying Printer-Related Information (→P.590)Note• RemoteUI also offers many other features. You can display the ink levels, check error messages andother status information, and cancel print jobs.• By factory default, the English screen is displayed. To change the display language, select the desiredlanguage under Language before logging on in administrator mode.Important• Use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later as a webbrowser. In Mac OS X, you can also use Safari 1.32 or later or Safari 2.03 or later.• Access is not possible via a proxy server. In environments where a proxy server is used, add theprinter’s IP address to Exceptions (addresses accessed without a proxy server) in the web browserproxy server settings. (Settings may vary depending on the network environment.)• Enable JavaScript and cookies in the web browser.• If you access RemoteUI with the printer name instead of its IP address, make sure the DNS settings arecorrectly congured.584 Network Setting
