Control PanelSystem SetupSetting Item Description, InstructionsBuzzer Set the buzzer. Choose On for the buzzer to sound once forwarnings and three times for errors.Detect Mismatch Choose Warning for notication (display of a warning message)during printing if the type of paper specied in the printer menudoes not match the type in the printer driver. Choose None tocontinue to print without notication. Choose Pause to haveprinting paused under these circumstances. In this case, youcan continue printing by pressing the Online button.WarningSkip Take-Up Err Choose On to continue with printing even if an error occurs withthe Media Take-up Unit. Choose Off to have the printer pausebefore printing if a rewinding error occurs.Keep Media Size Choose On to use the paper size setting as the basis for printinginstead of other settings. The margin setting of the printer menuwill be used instead of the margin setting of the printer driver ifthe latter is smaller, which may prevent text or images in thetrailing margin from being printed.Choose Off to use the printer driver settings instead. Even if themargin setting of the printer driver is smaller than that of theprinter menu, text or images will not be cut off. However, thisrequires longer paper because the actual margin will be equal tothe margin setting of the printer driver plus the margin setting ofthe printer menu.Sht Selection 1 If sheet size detection is activated, choose whether ISO A3+or 13"x19"(Super B) is applied when an intermediate size isdetected.Paper Size BasisSht Selection 2 If sheet size detection is activated, choose whether ISO B1or 28"x40" (ANSI F) is applied when an intermediate size isdetected.Noz. Check Freq. Specify the timing for automatic checks of nozzle clogging.Choose 1 page to check once per printed page. Choose 10pages to check once per ten printed pages. Choose Automaticto have the printer automatically adjust the timing for checksbased on the frequency of nozzle use.CarriageScanWdth For specifying the carriage scan width during printing. SelectAutomatic for movement equivalent to the width of paperloaded. Selecting Fixed will reduce any soiling on the back ofthe paper, although printing may take a little longer.Printer Parts 61
