Control PanelInterface SetupSetting Item Description, InstructionsEOP Timer Specify the timeout period before cancellation of printjobs that cannot be received by the printer.IP Mode Choose whether the printer IP address is conguredautomatically or a static IP address is enteredmanually.DHCPBOOTPProtocolRARPSpecify the protocol used to congure the IP addressautomatically.IP AddressSubnet MaskTCP/IPIP SettingDefault G/WSpecify the printer network information when usinga static IP address.Enter the IP address assigned to the printer, as wellas the network subnet mask and default gateway.NetWare Specify the NetWare protocol. To apply yourchanges, choose Register Setting.Frame Type Specify the frame type to use.NetWarePrint Service Choose the print service.AppleTalk Specify whether to use the AppleTalk protocol. Toapply your changes, choose Register Setting.Auto Detect Specify the communication method. To apply yourchanges, choose Register Setting.Choose On for automatic conguration of the LANcommunication protocol. Choose Off to applyComm.Mode and Ethernet Type settings.Comm.Mode Choose the LAN communication method.Ethernet Type Choose the LAN transfer rate.Spanning Tree Choose whether spanning-tree packets aresupported over the LAN.Ethernet DriverMAC Address Displays the MAC address.Return Defaults Execute? is displayed if you press the ▼ button.Choose OK to restore the network settings to thedefault values.Printer Parts 59
