Canon imagePROGRAF iPF9400S Basic Manual

Also see for imagePROGRAF iPF9400S: Function guide Troubleshooting guide Manual User guide Brochure & specs

Contents

Cannot load sheetsCannot load sheetsCause Corrective ActionThe paper source selection is incorrect. Press the Load button and select the paper source.Paper is not cut straightPaper is not cut straightCause Corrective ActionThe paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.Paper rises by the ends of the cut position beforeit is cut.Reload the paper correctly.You are using paper that cannot be cut with theCutter Unit.Specify Manual in Cutting Mode in the Control Panel menu and use scissors or acutting tool to cut the roll after printing.(See "Specifying the Cutting Method for Rolls.") →User's GuideThe Cutter Unit is not installed correctly. Reinstall the Cutter Unit correctly.(See "Replacing the Cutter Unit.") →P.42The Cutter Unit blade is worn out. Replace the Cutter Unit.(See "Replacing the Cutter Unit.") →P.42Cut Speed is not configured correctly in the Con-trol Panel menu.Change the Cut Speed setting in the Control Panel menu.(See "Menu Structure.") →P.62During cutting, printed documents fall out at anangle.In the Control Panel menu, set Cutting Mode to Eject. Hold documents after printing,as they are cut.(See "Specifying the Cutting Method for Rolls.") →User's GuidePaper is not cutPaper is not cutCause Corrective ActionIn the printer driver, No or Print CutGuideline is specified in AutomaticCutting.Specify Yes in Automatic Cutting in the printer driver.(See "Page Setup Sheet (Windows).") →User's Guide(See "Paper Detailed Settings Dialog Box (Mac OS X).") →User's GuideIn the Control Panel menu, CuttingMode is set to Eject or Manual.If the Cutting Mode is Eject, press the Cut button to cut the paper.If the Cutting Mode is Manual, cut rolls with scissors or the like.(See "Specifying the Cutting Method for Rolls.") →User's GuideThe Cutter Unit is not installed. Install the Cutter Unit.(See "Replacing the Cutter Unit.") →P.42Rolls are not cut when you are using theMedia Take-up Unit.Either cut the roll paper by pressing the Cut button or lift the Release Lever and cut the rollwith scissors.(See "Removing Printed Documents from the Media Take-up Unit (Optional).") →User's GuideThe media take-up unit continues rotatingThe media take-up unit continues rotatingCause Corrective ActionThere is a foreign object in the path of the Media Take-up Sensor (indicated bya dotted line).Remove the foreign object from the Media Take-upSensor path. Arrange the Basket Cloth and Basket Rodso they do not interfere with the Media Take-up Sensor.Cannot load sheets iPF9400SBasic GuideTroubleshooting Problems Regarding Paper106