Cause Corrective ActionRemove the foreign object from the Media Take-upSensor path. Arrange the Basket Cloth and Basket Rodso they do not interfere with the Media Take-up Sensor.The Media Take-up Sensor cord is not connected to the Right Media Take-upUnit correctly.Reconnect the Media Take-up Sensor cord as follows.1. Turn the printer off.2. Disconnect the Media Take-up Sensor cord from theRight Media Take-up Unit and reconnect it firmly, allthe way in.3. Turn the printer on.(See "Using the Media Take-up Unit (Optional).")→User's GuideIf the Media Take-up Unit continues rotating, contactyour Canon dealer for assistance.The size of clear film cannot be detectedThe size of clear film cannot be detectedCause Corrective ActionThe Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.(See "Cleaning Inside the Top Cover.") →P.53Margins are wideMargins are wideCause Corrective ActionRolls are advanced a specific amount before cutting to prevent problems with cutting and paper ejection. This operation is normal.When printing on thin roll paper, the printed surface becomes scratchedWhen printing on thin roll paper, the printed surface becomes scratchedCause Corrective ActionThe roll paper has sagged during printing,scratching the surface of the paper and causingwrinkle creases in the paper.Set Roll Tension to High in the Control Panel menu.(See "Menu Settings.") →User's GuideIf you change the Roll Tension setting, We recommend that you perform Adj. Quali-ty.(See "Automatic Banding Adjustment.") →P.98iPF9400S The size of clear film cannot be detectedBasic GuideTroubleshooting Problems Regarding Paper107
