Canon imagePROGRAF iPF9400S Basic Manual

Also see for imagePROGRAF iPF9400S: Function guide Troubleshooting guide Manual User guide Brochure & specs

Contents

OtherWarning• Never disassemble the printer or attempt repairs. There are high voltage parts inside the printer that can cause a fire orelectrical shock.• Never use flammable sprays around the printer. The gas of flammable sprays can cause a fire or electrical shock, if itcontacts high voltage points inside the printer.• After removing the Cutter Unit, never touch the cutting edge (a). This could cause personal injury.Caution• Never place anything on the printer such as small metal objects (paper clips, staples), liquids, any type of liquid contain-er that contains flammable liquids (alcohol, benzene, etc.). If such objects fall into the printer, this could cause a fire orelectrical shock.• Never insert your hand into the printer while it is printing. Moving parts inside the printer can cause injuries.• To prevent a fire hazard or dangerous electric shock, if a foreign object falls into or a liquid spills into the printer, pressthe Power button immediately to switch the printer off, unplug the printer power cable from the outlet, and then call forservice. If you continue to use the printer, this could cause a fire or electrical shock.Important• Connect the interface cable correctly. To avoid damage, before connection make sure that the shape of the cable con-nector matches the connection point on the printer.• During printing, turn on the ventilation system in the room.• We recommend ensuring ample space for installation.Legal NoticesLegal NoticesFCC Regulations (U.S.A)Canon Large Format Printer iPF9400SThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Thisdevice may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accord-ance with the instructions, may cause harmful interference to radio communications.However, there is no guaran-tee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of FCC Rules.Do not make any changes or modifications to the equipment unless otherwise specified in the manual.Legal Notices iPF9400SBasic GuidePreface Safety Precautions4