Cutter UnitCutter UnitCutter Unit ..................................................................................................................................................... 42Replacing the Cutter Unit ............................................................................................................................. 42Cutter UnitCutter UnitWhen purchasing, check the Model number.Shape Model numberCT-06Note• For instructions on Cutter Unit replacement, see "Replacing the Cutter Unit." →P.42Replacing the Cutter UnitReplacing the Cutter UnitCompatible Cutter UnitsFor information on compatible cutter units, see "Cutter Unit." →P.42Access the menu for cutter unit replacement1 On the Tab Selection screen of the Control Panel, press ◀ or▶ to select the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Set./Adj. Menu is displayed.3 Press ▲ or ▼ to select Maintenance, and then press the OK button.4 Press ▲ or ▼ to select Change Cutter, and then press the OK button.The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.Note• If you do not respond within two minutes, cutter cleaner replacement is canceled. In this case, repeat the pro-cedure.Cutter Unit iPF9400SBasic GuideConsumables and Maintenance Cutter Unit42
