14L2ONAttention! Before memorising the transmitters for the first time remember to cancelthe entire memory content.1a Remove jumper "J2" from the interface1b Press button "P1" 3 times in sequenceon the interface1c Press button "P1" once more forsix seconds on the interface1d The green LED "L1" and the red LED "L2"will flash and remain lit during cancelling1e The red LED "L2" switches off and thegreen LED "L1" will flash for a few seconds thenit too will switch offAt this point all codes have been cancelled!2a Insert jumper "J2" on the interface2b Press button "P1" for at least six seconds2c Red LED "L2" on the interface will flash1 2 36 secL2ONL1ONL2OFFL1ON1. Cancelling the entire memory contentPROGRAMMING PROCEDUREPos. A2. Memorising the programming function access codefor remote memorisation from the keyboard6 secPos. B

Cardin Elettronica ZVL414.04 Manual