152d Type the function access code into the keyboard(max 6 digits e.g. 1-2-3-4-5-6) and press confirm "*"2e The green LED "L1" will flash and the red LED"L2" will switch off on the interface.The access code has been memorised!3a Remove jumper "J2" from the interface3b Press button "P1" on the interface for at least three seconds3c The red LED "L2" will flash on the interfaceAt this point the memorising procedure is active!3d Type the desired numerical code into the keyboard(max 6 digits e.g. 1-2-3-4-5-6) and press confirm "*"3e The keyboard will emit one beep for two secondsand the green LED will light upThe code has been accepted3f Within 13 seconds of confirming the code press one or morefunctions A-B-C-D in sequence (e.g. A-C)3g Press confirm "*" and the key board will emit a beep3h The green LED "L1" will flash on the interfaceThe code has been memorised and the functions have been assigned (e.g. A-C).80947*D12 36BCONA12583694BCD80947*DL1ON*80947*DL1ONL2OFF**3. Storing codes and selecting functions3 sec L2ONPos. A

Cardin Elettronica ZVL414.04 Manual