Cardin Elettronica ZVL414.04 Manual
                                                |
19• Inserting a code with more than 6 digits will cancel the operation in progress.Signal: the keyboard will emit a beep.• The available time between inserting one digit and the next is 5 seconds.Once the time has expired the operation will be cancelled.• "Code memorisation": once the code has been memorised the device will automatically quit the procedure after 20seconds has elapsed.Signal: the red LED will flash on the keyboard and 6 consecutive beeps will sound• Before memorising the transmitters for the first time remember to cancel the entire memory content.• Only one remote code memorising access code can be stored.To change it you need only repeat the procedure and save the new code.• Cancelling the entire memory content will also cancel the remote code memorising access code.• After 5 attempts to insert and incorrect code (doesn't exist in memory) the system will remain blocked for 60 sec-onds.Signal: the keyboard will sound 1 beep and both LEDS will flash for 5 seconds.Interface - the red LED flashes:- memory full (attempt to memorise has failed)- code doesn't exist (during memorisation)- code doesn't exist (during cancellation)Keyboard - the red LED flashes:- together with three slow beeps, code doesn't exist (during memorisation)- code doesn't exist (during cancellation)- together with three fast beeps, code doesn't exist in the operating mode.NOTESWarningsError signals |
Related manuals for Cardin Elettronica ZVL414.04
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine