Cardin Elettronica ZVL414.04 Manual
                                                |
16If you have not already carried out the "Memorising the programming function access code for remote memo-risation from the keyboard ", do so now (ref. 2, pag. 14)Attention! Memorising is only possible if jumper "J2" has been insertedIf the "Memorising the programming function access code" procedure has been carried out:4a Type the function access code into the keyboardand press confirm "*"4b The keyboard will emit a beep and the red and green LEDSwill light up (the green LED will then switch off)The function is active!4c Type the desired numerical code into the keyboard(max 6 digits e.g. 1-2-3-4-5-6) and press confirm "*"4d The keyboard will emit a beep for two secondsand the green LED will light upThe code has been accepted and memorised4e Within 13 seconds of confirming the code pressone or more functions A-B-C-D in sequence (e.g. A-C)4f Press confirm "*" and the keyboard will emit a beepThe functions have been assigned (e.g.. A-C)5a Remove jumper "J2" from the interface5b Press and release button "P1" on the interfaceOPERATING MODE4. Memorising codes from a remote position**80947*D80947*D12 36BCON5. Cancelling a single codePos. A12 36BCONA12583694BCD80947*D* |
Related manuals for Cardin Elettronica ZVL414.04
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine