Carrier 42NQV025H Service Manual

Contents

– 50 –3. DRY OPERATION (COOLING ONLY)For dehumidification, a moderate cooling performance is controlled automatically.1. Press MODE : Select Dry .2. Press MODE : Set the desired temperature.4. Hi-POWER OPERATIONTo automatically control room temperature and airflow for faster cooling or heatingPress HI-POWER : Start and stop the operation.operation (except in DRY and FAN ONLY mode)5. ECO OPERATIONTo automatically control room to save energy (except in DRY and FAN ONLY mode)Press ECO : Start and stop the operation.Note: Cooling operation; the set temperature will increase automatically 1 degree/hour for 2 hours (maximum 2 degrees increase). For heating operation theset temperature will decrease.6. TEMPORARY OPERATIONIn case of the misplaced or discharged remote control• Pressing the RESET button, the unit can start or stopwithout using the remote control.• Operation mode is set on AUTOMATICoperation, preset temperature is 24°Cand fan operation is automatic speed.7. TIMER OPERATIONSetting the ON Timer Setting the OFF TimerPress ON: Set the desired ON timer. Press OFF: Set the desired OFF timer.Press SET : Set the timer. Press SET : Set the timer.Press CLR : Cancel the timer. Press CLRPress ON: Set the ON timer. Press SET.Press OFF: Set the OFF timer. Press SETbutton during the ( or )mark flashing.11232334Everyday timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.Setting Everyday Timer• During the every day timer is activation, both arrows are indicated.( or )FILE NO. SVM-07013Note:• Keep the remote control in accessible transmission to the indoor unit;otherwise, the time lag of up to 15 minutes will occur.• The setting will be saved for the next same operation.