Carrier 53QG18-H Installation Manual

10INSTALLATION ACCESSORIES (Cont.)7.4 OTHER INSTALLATION ACCESSORIESNot supplied from the factory but must be used in the field to complete installation.DESCREPTION USAGEElectrical Connection Cords To electrically connect the indoor unit, the outdoor unit and circuitbreakerـ Wall Sleeveـ Wall Capـ Sealer puttyTo fill the gap between the wall hole and the lump of refrigerantpiping lines, electrical connection cables and condensate drain line.ـ Finishing tape PVC film To tie together the refrigerant piping lines, electrical connectioncables and condensate drain line.ـ Vinyl tape To stick pipe insulation.ـ Drain hose ID 16-17mm To remove condensate water, from the indoor unit to the outside.ـ Refrigerant piping lines To connect Freon R22 between outdoor and indoor unitsـ Pipe insulation To insulate suction and liquid refrigerant piping lines- Refrigerant R22 To adjust refrigerant charge for long refrigerant piping lines(more than 3 meter)- Refrigerant Oil To be added for long refrigerant piping lines (more than 10 meters)- Clamps or saddles To secure the lump of refrigerant piping lines, electrical cables andcondensate drain line