Carrier 53QG18-H Installation Manual

34. DIMENSIONS, WEIGHTS AND MINIMUM CLEARANCES4-1 OUTDOOR UNITS38QG SERIESDIMENSIONS (mm)WeightModel Kg38QG18 52.838QG24 58.5MINIMUM CLEARANCES FOR FREE AIR CIRCULATION, SERVICE AND MAINTENANCENotes:- The front of the condensing unit (Propeller discharge airside) should be free from obstructions.Any obstruction should be away from front of the condensing unit with distance specified in thefollowing drawings.- The back of the condensing unit (coil intake airside) should be at least 160 mm away from anyobstruction. This distance 160 mm A is built-in design of wall support.- A free space should be left on the right side of the outdoor unit.- A free space should be left on the side of the refrigerant connections of condensing unit to ensureeasy access to the terminal block.- A free space should be left from the top cover of condensing unit to ensure easy access to electricalcomponents, motor and propeller.- The refrigerant line connections must be conveniently located for service and maintenance.Kg576860665665350602371384350