Casio IT-G500-C16E User Manual

Also see for IT-G500-15E: Software manual Service manual

Contents

E-53. Load the battery pack. Note the batterypolarity (+/ -). Take care also to load thebattery pack so that the removal tapeextends above the battery.4. Replace the battery pack cover and turnthe cover lock switches to the “LOCK”position, as shown in the illustration.When loading the high-capacity batterypack, be sure to use the high-capacitybattery pack cover.This precaution also applies when usingthe optional flat battery cover.Tip!When attaching the battery pack cover, take care to ensure that the end with “FREE”and “LOCK” markings faces the lock switches.Removing1. Make sure that the Handheld Terminal is turned off.If the power is on, press the power key to turn it off.2. Turn the battery pack cover lockswitches on the back of the HandheldTerminal to the “FREE” position andremove the battery pack cover.3. Remove the battery pack by pullingup the removal tape as shown in theillustration.Important!When removing the battery pack, make sure you do not leave the HandheldTerminal without a battery pack for more than about 4 minutes. Doing so cancause data in the memory to be deleted.When removing the battery pack, be sure you carefully follow the properprocedure as explained in this guide.Never try to use other type of battery than the ones that are specified for thisproduct.When removing the battery pack, pull the removal tape straight up and removethe battery pack. Removing with excessive force can damage the battery pack.••••