Casio IT-G500-C16E User Manual

Also see for IT-G500-15E: Software manual Service manual

Contents

E-28Handling the NFCThe NFC is a technology of contactless IC card for short range communication thatenables writing data to card and reading data from the card by applying the card closeto the NFC Reader on IT-G500.The integrated NFC can read a contactless IC card used typically for employmentidentification, etc.1. Hold the card flat against the NFC reader ( ) on the top of the Handheld Terminal.Important!If reading a card is difficult, slightly change the position by moving it either closeto the NFC Reader or far away, or to the right or to the left.Do not apply card while it is overridden by other card. The NFC may not read itcorrectly.A metal object near by the NFC Reader may cause the NFC not to read cardcorrectly. Take the card out of a wallet if the wallet is with metal object beforeapplying it to the NFC Reader.Apply card in parallel with the NFC Reader to touch the NFC Reader with thecard.Frequency band used by the NFC is 13.56 MHz. Secure a sufficient spacebetween IT-G500 and other reader/writer located in the vicinity. Make sure alsothat a radio station employs the same frequency band does not locate near byprior to using IT-G500.•••••