Casio IT-G500-C16E User Manual

Also see for IT-G500-15E: Software manual Service manual

Contents

E-351. Hold down Fn key and CLR key while pushing down the reset switch for about 3seconds with the tip of a stylus until the message shown below appears on the display.To cancel the full reset operation, press L Trigger key on the scan engine integratedmodels or L Enter key on the non-scan engine integrated models.Message appeared on the scan engine integrated models.R Trigger key (Forscan engineintegrated models)R Enter key (Fornon-scan engineintegrated models)Message appeared on the non-scan engine integrated models.2. Press R Trigger key on the scan engine integrated models or R Enter key on the non-scan engine integrated models. This causes the message shown below to appear.To cancel the full reset operation, press L Trigger key on the scan engine integratedmodels or L Enter key on the non-scan engine integrated models.Message appeared on the scan engine integrated models.R Trigger key (Forscan engineintegrated models)R Enter key (Fornon-scan engineintegrated models)Message appeared on the non-scan engine integrated models.3. Press R Trigger key or R Enter key again to perform the full reset.The full reset starts and all data in the memory are erased, and the start-up screenappears.Data stored in the Flashdisk folder remain unaffected.•••