E-22Configuring Handheld Terminal SettingsCalibrating Touch Screen AlignmentWhenever the response of the touch screen is poor, or operation being executed doesnot match with the location you are tapping on the touch screen, please recalibrate thealignment of the touch screen using the following method.Press the “Fn” key and then press the “4” key after confirming that “F” is displayedin the lower right corner of the screen. The following screen is displayed.∗ You can also display this screen by navigating as follows:Start " Settings " System " Screen " Align ScreenPress the stylus against the center of the target mark (+ mark) as indicated on thescreen.After the calibration is complete, the terminal resumes a screen automaticallyaccording to the method carried out to initiate the calibration.If you start the calibration by pressing "Fn" and "4" keys, the terminal resumes Startscreen, or General tab screen of Settings mode which is the screen one before alignscreen of Settings mode if you initiate by navigating to the icons.••
