Casio Privia PX-S3000 User Manual

Also see for Privia PX-S3000: Manual Connection guide

Contents

Casio Privia PX-S3000 User Manual Manual pdf 15 page image

EN-14■ To insert a character1. Use the bk U and bl I buttons to move thecursor to the position where you want to inserta character.2. Touch bs Area 2.This inserts “A” at the cursor position and enters thecharacter editing mode.• At this time you can change the “A” to a differentcharacter if you want. To do so, perform the procedureunder “To change a character” from step 2.■ To delete a character1. Use the bk U and bl I buttons to move thecursor to the position of the character youwant to delete.2. Touch br Area 1.■ To save edited text1. Touch cl STORE.■ Supported Input CharactersInput of the characters shown in the table below is supportedwhen saving a file to a USB flash drive.• When saving a file to a USB flash drive, you will be able touse up to 231 characters for a file name.• If you use this procedure to edit the file name of a file on aFAT32 formatted USB flash drive, you will not be able toinput some of the characters shown above.You can use the procedure below to play back the six built-indemo songs in sequence.1. Hold down the bp^ button until “DEMO”under the bn DEMO button starts to flash.2. Touch bn DEMO.This causes the bn DEMO button light and “DEMO”indicator to turn off, which indicates demo play standby.At this time, the display will show “1: Demo Song”.• You can also use the bk – and bl + buttons to switchbetween songs. This operation can be performed whileplayback is in progress.3. To start demo play, touch 8a orbm ENTER.• After this, you can pause and resume demo play bytouching 8a or bm ENTER.4. To exit demo play standby, touch bp EXIT.• If Auto Power Off (page EN-6) is enabled, power will turn offautomatically at the applicable trigger time after a period ofnon-use, even if demo play is being performed.Your Digital Piano comes with a large collection of tones. Youcan select a tone and play it on the keyboard.■ Tone CategoriesThe tones of your Digital Piano are divided among sixcategories, which you can access using TONE categorybuttons bq through cl. Each of the six categories is dividedfurther into sub-categories, and touching the TONE categorybutton for a particular category will cycle in sequence betweenits sub-categories.For details about tone categories and sub-categories, and thenames of tones included in each sub-category, refer to theseparate “Built-in Music Data Lists”.0AN[iv!1BO]jw#2CP^kx$3DQ_ly%4ER`mz&5FSan{'6GTbo}(7HUcp~)8IVdq+9JWer,;KXfs-=LYgt.@MZhuDigital Piano OperationsListening to Demo PlaySelecting a ToneSelecting a Single Tone