EN-59Digital Piano OperationsOperation Lock disables button operations, except for the1P (Power) button and the button operations required tounlock operations.■ To lock operations1. Hold down the bp^ button until “[FUNCTION]”appears on the display.This enters the FUNCTION Mode.2. Use the bk U and bl I buttons to select thefollowing menu items in sequence: “SYSTEM”3 “Operation Lock”.3. Use the bk – and bl + buttons to change thedisplayed setting from “Off” to “On”.4. To exit the FUNCTION mode, hold downbp EXIT until “[FUNCTION]” disappears fromthe display.■ To unlock operations1. Hold down the bp^ button until “[FUNCTION]”appears on the display.This enters the FUNCTION Mode.The display appears as shown below when an operationis locked.2. Use the bk – and bl + buttons to change thedisplayed setting from “On” to “Off”.3. To exit the FUNCTION mode, hold downbp EXIT until “[FUNCTION]” disappears fromthe display.Use the FUNCTION parameters below to change the DigitalPiano’s MIDI settings. For information about FUNCTIONparameters, see “Configuring Function Settings (FUNCTIONMode)” (page EN-53).Using Operation Lock[F U N C T I O N]–O n+Ope r a t i o n L o c kConfiguring MIDI SettingsSetting FUNCTION ParameterKeyboard ChannelThis setting specifies a channelfrom 1 through 16 as the MIDIchannel that can be used forsending data to an externaldevice.Keyboard Chan(number 89)Local ControlWhen this setting is turned off,performance information (MIDIdata) is sent from the DigitalPiano, but no Digital Pianosound is output. This setting isfor when you only want to sendMIDI data to an external device.Local Control (number 90)Hi-Reso Velocity MIDI OutThis setting enables/disableshigh-resolution MIDI output oftouch pressure (velocity) whenkeyboard keys are pressed.Hi-Reso MIDI Out(number 91)Accomp MIDI OutEnabling this setting outputsAuto Accompanimentinformation as MIDI data.Accomp MIDI Out(number 92)