Chapter 11 D Type Sequin Embroidery⑥ click or till you see “C”, then click to confirm;⑦ click digital key “4” and click to confirm;⑧ click or till you see “AC”，click to confirm;⑨ click digital key “6”, click to confirm;⑩ use or till you see “END”, and click to confirm.（ 5 ） Directly click digital key“1”, then click to complete setting ofcolor-changing.Note: if it is single sequin, directly click needle number.11.7 Manual Operation of Sequin EmbroideryIt has two ways of operation, collective operation and separated operation.1. Collective Operation：Collective operation can be divided into three parts: “sequin start”, “sequin end” and“send sequin”.（1）In the main screen, click and “special embroidery operation” one by one, thenselect “sequin start” to let all the clamp feet down;（2）In the main screen, click and “special embroidery operation” one by one, thenselect “send sequin”, once you make a click, the activated machine heads will all send asequin（with clamp foot down）;（3）In the main screen, click and “special embroidery operation” one by one,then “sequin end” to lift all the clamp feet.2. Separated operation： Thread break switch is embroidery switch. When thread break switch is at thedown side, neither flat embroidery nor sequin embroidery is available; Thread break warning lamp is mounted on the sequin sending device, which120 BECS-A18/A58 computerized embroidery machine owner’s manual
