Chapter 7 Memory Design Edit7.2.6. Convert Stitch CodeAfter orient some one stitch, click key and can convert the type of that stitch.Include X/Y position stitch for move, such as stain stitch, jump stitch, send sequin etc., thestitch code type can convert mutually.Don't include X/Y position stitch for move, such as switch of sequin﹑stop code, changecolor code etc., the stitch code type can convert mutually.7.2.7. Insert StitchClick key can insert a new stitch code after current stitch.If the current stitch is the last stitch of the design, so the insert position of new stitch is theexcursion of current stitch with same direction and same distance. If the last stitch inserts at thesame point, then the newly inserted stitch position is: X/Y intervals are both 4.5mm.If the current stitch in the middle of design, so the new stitch insert at the middle positionof current stitch and next stitch.7.2.8. Delete StitchPosition the some stitch, click key and can delete that stitch.74 BECS-A18/A58 computerized embroidery machine owner’s manual
