Appendix Ⅳ Network Connection of Embroidery MachinesAppendix Ⅳ Network Connection of EmbroideryMachinesI. Making Ethernet cable1. Making straight-through cableThe pins in the two terminals of twisted-pair cable have to be in one-to-onecorrespondence. If the first pin of one terminal is green, the first pin of the other terminal mustalso be green. The twisted-pair cable made in this way is usually called “straight-throughcable”.Connection:Pinnumber1 2 3 4 5 6 7 8Pincolororangewhiteorange greenwhiteblue bluewhitegreen brownwhitebrownShown in the following picture:One terminal The other terminalUsage: a. Link switch or HUB to routerb. Link computer (including server and workstation) to switch or HUB2. Making crossover cable1－3, 2－6 crossover connection: Twisted-pair cable has 4 pairs of pins (8 pins). Only 4pins are used in network, namely the first, second and third, sixth pins. They are used forreceiving and sending signals. The connection rule is: the first pin of one terminal is connected164 BECS-A18/A58 computerized embroidery machine owner’s manual
