402.0 Getting Started2.9.4.3 Data Editing TabAllows the user to add data string termination to data strings. The DataString Termination setting tells Link*One which character or charactersequence terminates a data string received on the serial port. Alterna-tively, you can use a timeout value as a terminator.NOTE: If Timeout is set to 30 ms, Link*One will terminate an inputstring when no data has been received for 30 ms.To add a data string terminator1. Under the Data Editing tab, tap the Character(s) radio button.2. Tap the Select button.3. The Select Data String Terminator window will open and dis-play a library of terminator characters with their associated ASCIIcodes in both decimal and hexidecimal notation.4. Tap the desired terminator to highlight it.5. Tap the OK button to select the desired terminator.To change the millisecond delay for the terminator6. Tap the Timeout radio button.
