643.0 Operating the Unit3.1.3 Integration to Windows 7The GPS is handled as a standard sensor in Windows 7:If the Weather gadget is opened, it will update with a city nearby.DAP-Imager uses the same method to get the current position in orderto geotag images.3.2 DAP-Imager Instructions3.2.1 What is DAP-ImagerDAP-Imager allows taking pictures using the built-in camera. It alsofeatures a barcode decoding engine to read 1D and 2D barcodes, usuallyused with ScannerManager.3.2.2 Selecting the Right ModeThe upper right icon (or lower left if unit is in portrait) is used to selectthe mode:The portrait, landscape and macro modes are used to take pictures,whereas barcode mode is used to read barcodes. Mode settings are de-fined in the INI file. Refer to that section for more details.3.2.3 Pictures3.2.3.1 How to Take a PictureTo take a picture, press and release the trigger button on the back of theunit. Alternatively, you can click on Capture.3.2.3.2 FlashThe flash can be turned on or off using the flash menu.No automatic flash is supported at this time.
