DAPAudio M9000 User Manual
                                                                                                                          | |
Contents
| 
683.0 Operating the Unit3.2.8.4 DefaultFocus = 3733Not used in this version of DAP-Imager.3.2.8.5 Aimer = ONNot used in this version of DAP-Imager.3.2.8.6 DecodeAfterAutofocus = ONNot used in this version of DAP-Imager.3.2.8.7 MaxNbrResults = 1When several barcodes are visible in an image, the decoder can returnmore than one result. Set this value to the maximum number of resultsthat are considered. If 1, the first result is returned and the others arediscarded.3.2.8.8 DecodeTimeoutMs = 1500Maximum duration of a decode operation, in milliseconds. If the de-code operation takes longer, it is cancelled. Using a small timeout won’tallow decoding most barcodes. Using a higher value may have an im-pact on the user interface responsiveness.3.2.8.9 MaxNbrAttempts = 1In the Standard or DecTrigUp UI policies, number of attempts DAP-Imager tries to decode before returning NO READ.3.2.8.10 InactiveTimeBeforeStandbyLevel1 =10000Number of milliseconds before the flash light is turned off.3.2.8.11 InactiveTimeBeforeStandbyLevel2 =10000Number of milliseconds before the camera is stopped when the triggeris not pressed. Waking up the camera takes a few seconds. If you scanbarcodes often, you may want to increase this value. Decrease it to savepower.3.2.8.12 KbWedge = OFFSet this option to ON if you don’t use ScannerManager and want towedge barcodes.3.2.8.13 AddTab = OFFWhen KbWedge is ON and a barcode is wedged, simulates a TAB keyafter the barcode data.3.2.8.14 AddEnter = ONWhen KbWedge is ON and a barcode is wedged, simulates a RETURNkey after the barcode data.3.2.8.15 Preamble =When KbWedge is ON and a barcode is wedged, this value is prefixedto the barcode data.3.2.8.16 Postamble =When KbWedge is ON and a barcode is wedged, this value is appendedto the barcode data.3.2.8.17 InterCharDelay = 0When KbWedge is ON and a barcode is wedged, sets the delay betweeneach key that is simulated, in milliseconds.3.2.8.18 MaxGainWithoutMVLight = 2500Not used in this version of DAP-Imager.3.2.8.19 MinGainWithMovieLight = 1000Not used in this version of DAP-Imager.3.2.8.20 MaxGain = 4000Not used in this version of DAP-Imager.3.2.8.21 GainStep = 200Not used in this version of DAP-Imager.3.2.8.22 IdealGain = 2000Not used in this version of DAP-Imager.3.2.8.23 FlashIntensityStep = 100Not used in this version of DAP-Imager.3.2.8.24 MaxFlashIntensity = 100Not used in this version of DAP-Imager.3.2.8.25 MaxShutter = 4000Not used in this version of DAP-Imager.3.2.8.26 ShutterStep = 260Not used in this version of DAP-Imager.3.2.8.27 IdealShutter = 575Not used in this version of DAP-Imager.3.2.8.28 AppendSymbology = OFFWhen ON, DAP-Imager will wedge the name of the symbology afterthe barcode data. It can be used to find out the symbology of a barcode.3.2.9 [OCR]OCR not yet supported in this version of DAP-Imager.3.2.10 [ImagerModes]3.2.8.1 ModeList = Portrait,Landscape,Macro,Barcode,Lists the modes that appear in the camera mode menu. The modes spec-ified here must be defined in the sections that follow.3.2.11 [ImagerMode:XXXX]This sections defines a given imager mode (XXXX), as listed in ModeL-ist. Not all values are used; it depends on the ModeType option.3.2.11.1 ModeType = 0A value of 0 indicates that it’s a mode to take pictures.A value of 1 is for barcode decoding.3.2.11.2 IconID = 142Resource ID of the icon to be shown in the mode menu. You can use aresource editor to view the icons that are available (for example: http://www.resedit.net/).3.2.11.3 SelectionButtonImageFileName = res\button-mode-portrait80.pngFile path of the image shown when the mode is selected (mode button). |
Related manuals for DAPAudio M9000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine