DAPAudio M9000 User Manual
                                                                                                                          | |
Contents
| 
865.0 UPC TypesCode 11 - Length Within RangeLength Within Range - Select this option to decode a Code 11 sym-bol with a specific length range. Select lengths using numeric bar codesin Numeric Bar Codes on page 8-76. For example, to decode Code 11symbols containing between 4 and 12 characters, first scan Code 11- Length Within Range. Then scan 0, 4, 1, and 2 (single digit num-bers must always be preceded by a leading zero). To correct an error orchange the selection, scan Cancel in Section 5.5.1 on page 95.Code 11 - Any LengthAny Length - Scan this option to decode Code 11 symbols containingany number of characters within the scanner capability.5.5.3 Code 11 Check Digit Verification :Parameter # 0x34This feature allows the scanner to check the integrity of all Code 11symbols to verify that the data complies with the specified check digitalgorithm. This selects the check digit mechanism for the decoded Code11 bar code. The options are to check for one check digit, check for twocheck digits, or disable the feature.To enable this feature, scan the bar code below corresponding to thenumber of check digits encoded in your Code 11 symbols.*Disable(0x00)One Check Digit(0x01)Two Check Digits(0x02)5.5.4 Transmit Code 11 Check Digits :Parameter # 0x2FThis feature selects whether or not to transmit the Code 11 check digit(s).Transmit Code 11 Check Digit(s) (Enable)(0x01)*Do Not Transmit Code 11 Check Digit(s) (Disable)(0x00)NOTE: Code 11 Check Digit Verification must be enabled for this pa-rameter to function.*Enable Interleaved 2 of 5(0x01)Disable Interleaved 2 of 5(0x00)5.6 Interleaved 2 of 55.6.1 Enable/Disable Interleaved 2 of 5 :Parameter # 0x06To enable or disable Interleaved 2 of 5, scan the appropriate bar codebelow.5.6.2 Set Lengths for Interleaved 2 of 5 :Parameter # L1 = 0x16, L2 = 0x17The length of a code refers to the number of characters (i.e., human read-able characters), including check digit(s) the code contains. Lengths forI 2 of 5 may be set for any length, one or two discrete lengths, or lengthswithin a specific range.NOTE: When setting lengths, single digit numbers must always bepreceded by a leading zero. |
Related manuals for DAPAudio M9000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine