ES601Plus OPERATING MANUALFig u re 1048.8.9 Uploading AutoSequencesTo upload the sequences to ES601Plus, press the "Upload To ES601" button. Choose uploading viaUSB, Ethernet, or Serial Port, and then press "Connect". If the connection is via ethernet, enter inthe IP address assigned to ES601Plus (the IP address of ES601Plus is displayed on the LCD whenES601Plus is operating in Ethernet Mode). If the connection is via serial port, choose the COMport to which ES601Plus is connected.After pressing "Connect", a message box with a transfer progress bar will appear. After the transferis completed, a Transfer Complete message will appear and the message box will disappear.8.8.10 Downloading AutoSequencesSometimes it is desirable to download sequences stored in ES601Plus. You can do this by pressingthe "Download From ES601" button. Choose to download via USB, Ethernet, or Serial Port andpress "Connect". The connection sequence will proceed as described in Uploading Sequences,above.ES601pc Software/Chapter 8 # Page 169
