ES601Plus OPERATING MANUALFig u re 1 - Startup Menu3 Setup3.1 Powering Up/Start-up MenuWhen the power to ES601Plus is switched on, the Start-up menu is displayed while internal self-tests areconducted. The Start-up menu displays the firmware version and the current time and date.Depending on how the "STARTUP MODE" has been configured under System Settings, the above menumay remain on the LCD indefinitely, or may be automatically replaced by either the MANUAL MODEmenu or the AUTO MODE menu after a few seconds.Optionally, the "STARTUP MODE" can be set to enable a test of the AC supply voltage at five secondsafter power-on. If the AC supply test at startup has been enabled, ES601Plus will produce an alarm if areversed-supply condition is detected. Note that a reversed AC supply may affect test results, particularly theleakage measurements. In the event of a reversed-supply alarm, connect to a different wall outlet orinvestigate the wiring of the wall outlet in use before proceeding.Setup/Chapter 3 # Page 21
