DCS BGB30-BQR Series Use And Care Manual

Also see for BGB30-BQR Series: Specifications Use and care guide Brochure & specs Use and care guide

INSTALLATIONLOCATING GRILL/BUILT-IN CLEARANCESClearances to Non-Combustible Construction*:A minimum of 3" clearance from the back of the grill to non-combustible construction is required for the purposeof allowing the lid to open fully. It is desirable to allow at least 6" rear and side clearance to non-combustibleconstruction above the cooking surface for counter space. If you'll be using the rotisserie option, the space isessential for motor and skewer clearance. The grill can be placed directly adjacent to non-combustibleconstruction below the cooking surface. (Fig. 02).Clearances to Non-Combustible Construction*......... [ 30" MOdels =39"(withrotisserie motor mounted) ] .........................................26-1/2"9rillexnau- 25-1/2non-combustibleconstruction /minimumlid clearance)10-1/16"FIG. 02WARNING!Failure to maintain required clearances creates a fire hazard that may result in property damage or serious personalinjury.WARNING!The BGB Grill is designed to function in an open area. Recommended minimum clearances should be maintained toall surfaces (combustible and noncombustible) for optimum performance. Noncombustible material within the mini-mum clearance area could result in discoloration or deterioration.WARNING!If a noncombustible material such as stucco is covering a combustible material such as wood, the minimum clear-ance distance needs to be held to the wood. The presence of a noncombustible material inside the clearance zonedoes not eliminate the minimum clearance zone to combustible material.* DEFINITIONOF NONCOMBUSTIBLEMATERIAL- Material which is not capable of being ignited and burned, such asmaterials consisting entirely of, or a combination of, steel, iron, brick tile, concrete, slate, and plaster.Clearances to Combustible Construction**:Minimum of 12" from the sides and rear of grill must be maintained to adjacent vertical combustibleconstruction, above the counter top level. You should take in account that there is a large volume of heat, andsmoke will exhaust from the rear of the grill. This may discolor or damage unprotected areas (Fig. 03). Do notinstall under unprotected combustible construction without using a fire safe ventilation system.A 12" minimum clearance must be maintained under the counter top to combustible construction. The clearancecan be modified by a use of an insulated jacket.8