DCS RDT-305 Use And Care Manual

Also see for RDT-305: Installation guide Installation guide

DCS RDT-305 Use And Care Manual Manual pdf 9 page image

7bEFORE USING yOUR APPLIANCE1. Remove all packaging materials and labels from your appliance. If the installer has not set up your appliance, doit now. Check that you have the following items:COOkTOP:n Griddle cover- (RdT-364Gd, RdT-486Gd, RdT-484GG, and RdT-485Gd Models only)n Grill cover- (RdT-364Gl, RdT-484GG, and RdT-485Gl Models only)n Grill grates, 2 pieces - (RdT-364Gl, RdT-486Gl & RdT-484GG Models only)n 6 burner head assemblies, burner caps and grates (number of grates depends on the unit), (5 burner heads onRdT-305 and RdT-485Gd Models only, 4 burner heads on RdT-364 and RdT-484GG)n Radiant tray - to hold ceramic rods for grill - (RdT-364Gl, RdT-486Gl & RdT-484GG Models only)n one removable drip tray (griddle and grill models only have drip tray liners, for catching grease)24” & 27” OVEN:n one, Two-piece broil pann Three oven Racks12” OVEN:n Two oven racksn Two removable Rack supportsNOTE:If any of the listed accompanying items are missing, contact DCS at (888) 936-7872. Please be prepared with yourModel #, Serial # and description of product you have purchased.Regarding use of aluminum foil in a dCs Range oven: do not use aluminum foil to cover the oven racks or to linethe oven. Heat can be trapped beneath the foil; this can cause damage to the oven and cause food to notcook correctly.2. Place the oven racks in the proper position before turning on the oven. For correct rack position check yourrecipe. The most frequently used position is number 2. The rack positions are numbered from the bottom as inthe floors of a building. (Fig. 01)fig. 01rACk posiTions43214321