DELTA DORE CS 8000 TYXAL+ User Manual

Also see for CS 8000 TYXAL+: Quick installation guide User guide

DELTA DORE CS 8000 TYXAL+ User Manual Manual pdf 13 page image

EN- 25 -- 24 -6. Use with your outdoor keypad6.5 Controlling a control systemÊ Enter your access code (4 digits).Ë According to the type of control system, press or tocontrol it.The LED (button 5) changes from red to green to confirm theaction.The control is of the pulse type (e.g. gate)Press the button to control the opening or closing of theassociated opening: channel 1.Press the button to control the opening or closing of theassociated opening: channel 2.The control is of the hold type (lighting)Press the button to activate.Press the button to shut down.The control is of the roller shutter typePress the button to control the raise operation.Press the button to control the lower operation.Press the button to stop (accessible without access code).If you have associated control systems to the keypad, you cancontrol them after entering the 4-digit access code dedicated tothe control of control systems.The control systems can be of the pulse,hold or roller shutter type.Typeof controlsystemPulse(e.g gate)ON/OFFchannel 1ON/OFFchannel 2Hold(e.g. lighting) ON OFFRoller shutter Raise Lower7.1 General7.2 Using your touch screen keypadÊ Enter the user code (e.g. 456789) and confirm with OK.Ë Press Settings, select the menu:Access code > Change, then confirm with OK.Ì Select the code to change.Enter the old code, then the new code, name it,then confirm with OK.7.3 Using your simple keypadÊ Enter your user code (e.g. 456789).Ë Press and hold the button for 5 seconds.The LED changes from red to green to confirm the action.Ì Enter the access code to change (e.g. 456789), then pressthe button.The LED changes from red to green to confirmthe action.Í Enter the new code twice (within 10 seconds),then press the ON button.The LED changes from red to green to confirm the action.Access codesOkChangeBackChangeOkUser 1BackOld code_ _ _ _ _ _OkBackNew code_ _ _ _ _ _OkBackSoftware versionSettingsProgrammingOkBackDownloadAccess codesAccess codeXXXXXXOkSOS1 2 325/11/14 12:48SOS SettingsOFFEnter your codeInfo SettingsMy houseOFF25/11/14 12:48>5s123OKOK4OKImportant: the new code must be entered within 10 secondsafter entering the old one, otherwise the code remains thesame.7. Changing your access codeWe recommend that you keep the access codes confidential (6 digits). Avoid codes such as "date of birth" or series ofeasy to reproduce digits "222222", "234567", etc.You have 10 "user" or "restricted" codes (6 digits).• The user code enables the control actions and a few configuration actions.You can change it.• Restricted code: you can restrict access to your home by a code that gives access only to theON and OFF controls of the zones with which it is associated (e.g. maintenance personnel, delivery, etc.).• The access codes (6 digits) are recorded in the alarm control unit. You configure the access codes once with thetouch screen keypad and the other products (keypads or transmitters) recognise these codesautomatically. You do not need to configure the codes on each product.Wrong code entered: The keypad is locked for 90 seconds after five attempts to enter the wrong code.If there are many attempts to enter a wrong code (21 attempts), an alarm cycle will be triggered.