DELTA DORE CS 8000 TYXAL+ User Manual

Also see for CS 8000 TYXAL+: Quick installation guide User guide

DELTA DORE CS 8000 TYXAL+ User Manual Manual pdf 20 page image

EN- 39 -- 38 -12.1 Using your touch screen keypadÊ Enter the user code (e.g. 456789) and confirm with OK.Ë Press Settings, select the menu:Use > Products > Activate/deactivate, then confirm with OK.12.2 Using your telephone transmitterYou are in communication with the transmitter and it announces adefect with the installation.• It says:"To view the error details, type 1".Then, for example:"Error on detector in east bedroom, zone 2, on 23/11/2015"."To deactivate the product, press 2".• Enter 2 to deactivate the product.When you return home, remember tocheck the relevant product so as to reactivate it.When the product is deactivated, the control unit emits "readbeeps" each time the system is activated.The symbol is displayed on the screen to encourage youto view the type of problem.ProductsOkBackConfigureActivate/deactivateActivate/deactivateBrowseBackPress the buttonof the productDO 0 00 01< DeactivateOkBackDO 0 00 01Activate >OkBackUseZonesDoor chimeOkProductsBackSettingsClockLanguagesOkBackUseAccess codeXXXXXXOkSOS1225/11/14 12:48SOS SettingsOFFEnter your codeInfo SettingsMy houseOFF25/11/14 12:48The deactivation of a product is only available if you have atouch sensitive keypad in your alarm system. It will also enableyou to reactivate the product when the problem is resolved.12. Activating/Deactivating a productA product can be deactivated locally with a touch screen keypador remotely via a telephone transmitter (e.g. a detector thatgenerates intrusions because of an incorrectly closed window).When a product is deactivated, some of its functions are nolonger covered by the alarm control unit, but others remainenabled.Example: a deactivated remote control will continue tocontrol the system activations/deactivations, but will not report itsbattery defect.13. Summary of LEDs and audible signalsFront panel LEDLEDCommandaccepted (*)Greenfor 1 secondCommanddenied (*)Flashing redfor 2 secondsAlarm control unitin maintenancemodeFlashing red(*) Request for activation or deactivation (total or by zone).13.1 Operation of the front panel LEDConditions Audible signal typeEarcon • If a door is opened or a presence is detected in a room "Ding Dong"special toneWarning • Notice of automatic operation• Entry into a monitored zone Beep.... beep.... beep.... beep....Switch to maintenance mode(reserved for installer) • For each switch to Maintenance mode. Brief siren + call cycleCall to read(action rejected)• Action rejected (association, switch to maintenance mode orexiting the mode, total or by zone on or off command, etc.).The events on the touch screen keypad must be viewed (Infomenu).Beep beep beep beep beep...Action confirmed • Association, removal, test, activation or deactivationcommand (total or by zone), etc. Short beepIntruder alarm • For any intruder detection• For any sabotage attempt (tamper alarm) Intrusion sirenSmoke alarm • If smoke or any other fumes due to a fire hazard aredetected. Specific fire toneEmergency alarm with siren• Triggered by pressing the SOS button of a simple keypad,button 1 or 2 of a remote control or badge reader (ifprogrammed as such) or on the SOS button on a touchscreen keypad.Specific audible SOS tonediscreet emergency alarm• Triggered by a specific code (duress code) of a simple ortouch screen keypad, the button 1 or 2 of a remote control ora badge reader (if programmed as such).Discreet telephone callTechnical error • As soon as a technical defect arises. Specific technicalalarm tone13.2 Audible signals

/ 22

Related manuals for DELTA DORE CS 8000 TYXAL+