DW MEGAPIX User Manual

Contents

Quick Start of Network ConnectionNetwork Setup -Please follow the steps below to completethe initial setup of the network function.1.Open the IP Installer on a PC, then search for the IP camera.If multiple numbers of camera are connected it should bedistinguished by the mac address of the Camera.Click the Camera IP, and connect to the WEB PAGE.2.3.4.Default ID/Password to access IP Camera are both theword: admin.5.Familiarize yourself with the Viewer Interface Screen.6.please install VLC to display live video.7.The IP setting can be set to ‘STATIC’ at IP Installer or webviewer followed by Setup -> Network -> Network Settings.8.If you have a DHCP server, it will automatically set the Camera IP.If you do not have a DHCP server, Camera IP is set to 192.168.1.80after one minute. In this case, PC IP must be changed to the IP tobe able to access the 192.168.1.80.Please do not power on the IP Camera until instructed.Explorer.If connecting the IP Camera directly to a modem, power downand reset the modem. Leave the modem powered down untilcon tions ar nalized with the IP Camera and the IP Camerahas been correctly connected to the modem.If the IP Camera is connected to a network which utilizes arouter, you must have Port Forwarding co ured on yourpersonal router to forward all ports to the IP address youhave assigned the IP Camera.(if necessary), you may access your IP Camera on your localnetwork by opening Internet Explorer and specifying the IPaddress and Web Port that you have assigned to the IPCamera.9.10.Example: http://192.168.0.200:8888If you leave your Web Port set to 80, you don’t need to specifythe port in the Address Bar to access to your IP Camera.Access your IP Camera via the Internet :If you use a static IP address assigned by your ISP1) Open Internet Explorer.2) Type the IP of the IP Camera.3) If you use a router, type the routers’ static IP and the web portnumber of the IP Camera.If you have a dynamic address provided by your ISP1) Open Internet Explorer and visit the DDNS website.2) Register the IP Camera.3) Reboot the IP Camera.4) Give the DDNS server 10 minutes to locate your IP Camera’sIP information.5) Click the refresh button in the Internet Explore.6) After your camera is connected, select your camera.11.