DW MEGAPIX User Manual

Contents

[Motion] when the motion is detected, an event occurs.[Timer] the events occurs periodically. (Unit: second)- Action Types[Preset Move]When the PTZ camera is connected to, the command "Preset Move" is sent to the PTZ camera.[Digital Output]This means "relay output". The signal "Digital Output" is sent by the time that is defined. The output statuscan be adjusted as below.1) Close to open: sends the signal "Digital Output" to "open" state.2) Open to close: sends the signal "Digital Output" to "close" state.[TDN]This means "True Day&Night". Available only to some IP camera models.The color can be adjusted as below.1) BW: sets the color to "black and white".2) Color: sets the color to "color".Event Type[Add Event (+) button] click this button to add an event entry.1) Event Type: select one out of "Digital Input / Motion / Timer"1-1) Digital Input > Sensor: select a sensor to use.Digital Input > Status: select one out of "close to open / open to close"1-2) Motion > ROIs: Motion ROI (refer to the item "Motion Detect")1-3) Motion > Status: select one out of "on / off"1-4) Timer > Interval: select one out of "1 ~ 86400" (unit: second)2) Action Type: select one out of "Preset Move / Digital Output / TDN"2-1) Preset Move > No: select one out of "1~255". Set the preset on the item "Video Source".2-2) Digital Output > Relay/No: select considering the connection "Digital Output".2-3) Digital Output > Status: select one out of "close to open / open to close"2-4) Digital Output > dwtime: duration (1~60 seconds)2-5) TDN > Status: select one out of "BW / color"Create an event button: Click to create the setting event.Cancel button: Click to cancel the setting event.[Delete event (-) button] click this button to remove the event entry.[OK button] click this button to apply the changed setting values.