25TO CANCEL SLEEP MODE:To cancel sleep mode, press the SLEEP button again; theSLEEP indicator will disappear in the display.AUTOTO SET UNIT TO SLEEP MODEIn the cooling operation; When you are going to sleep, select this feature and the unit will cool off the room to the desired tempera-ture and then increase that temperature throughout the night.In the heating operation; When you are going to sleep, select this feature and the unit will heat up the room to the desired tempera-ture and then decrease that temperature throughout the night.1. Press the ON/OFF button on the re-mote control to turn the unit on; the OnLED will light on the indoor unit and“ON” will light in the remote display.2. Press the MODE button to select the de-sired mode. Then, set the desired tempera-ture using the TEMP. s ors buttons.3. Press the SLEEP button on the remote con-troller. The unit will then be in the sleep modeand will cool the room to the desired tempera-ture. After a while the unit will increase the tem-perature again. This process will then repeat.4. Press the “TURBO/MILD” button to selectpowerful cooling if this button is selectedone more time, it is become normal power.TURBO/MILD function is disable in actualheat operation (for example, heating oper-ation in the Auto Mode or Heat Mode)1. Open the indoor unit’s cover and make sure the EMER-GENCY/REMOTE switch is set to the EMERGENCY position.3. To turn the unit off, push the EMERGENCY/ REMOTEswitch to the REMOTE position.2. The unit will then turn on and depending on the room tem-perature, it will select the cool or dehumidifier, fan speed au-tomatically.EMERGENCY OPERATIONIf the remote control is lost, broken or has no batteries, follow the procedures below:EMERGENCY/REMOTE SwitchEMERGENCY/REMOTE Switch