1F – 392IENGINE CONTROLSDAEWOO V–121 BL43. Install the IAC valve retaining bolts.TightenTighten the idle air control valve retaining bolts to 27lb–in (3 Nm).4. Connect the IAC valve connector.5. Connect the negative battery cable.6. Start the engine and check for the proper idlespeed.MANIFOLD ABSOLUTE PRESSURESENSORRemoval Procedure1. Disconnect the negative battery cable.2. Disconnect the negative battery cable.3. Disconnect the Intake Air Temperature (IAT) sensorconnector.4. Disconnect the breather hose from the valve cover.Remove the air intake tube.5. Disconnect the throttle cable from the throttle bodyand bracket.
