DOORS 9P – 21DAEWOO V–121 BL4DOOR LOCK CYLINDERRemoval Procedure1. Remove the door seal trim. Refer to”Door SealTrim” in this section.2. Disconnect the outside door handle lock rod.3. Remove the retaining clip and the lock cylinder.Installation Procedure1. Install the lock cylinder with the retaining clip.2. Connect the outside door handle lock rod.3. Install the door seal trim. Refer to”Door Seal Trim”in this section.POWER FRONT WINDOWREGULATORRemoval Procedure1. Disconnect the negative battery cable.2. Remove the front door glass. Refer to Section 9L,Glass and Mirrors.3. Disconnect the electrical connector.
