HYDRAULIC BRAKES 4A – 17DAEWOO V–121 BL4STOPLAMP SWITCHRemoval Procedure1. Disconnect the negative battery cable.2. Disconnect the connector from the stoplamp switch.3. Rotate the switch and remove it from the brakepedal bracket.Installation Procedure1. Insert the stoplamp switch into the brake pedalbracket and rotate the switch to lock it.2. Connect the electrical connector to the stoplampswitch.3. Press the brake pedal and pull the switch plunger toits maximum setting to adjust the switch.4. Release the plunger and pull up on the pedal.5. Connect the negative battery cable.BRAKE PEDALRemoval Procedure1. Remove the stoplamp switch.
