9P – 32IDOORSDAEWOO V–121 BL4Installation Procedure1. Install the door weatherstrip.Notice : Dissimilar metals in direct contact with each othermay corrode rapidly. Make sure to use the correct fasten-ers to prevent premature corrosion.2. Install the door hold open link to the body with thebolt.TightenTighten the door hold open link–to–body bolt to 27Nm (20 lb–ft).DOOR SEAL TRIMRemoval Procedure1. Remove the door trim panel. Refer to Section 9G,Interior Trim.2. Remove the screws and the door pull bracket.3. Remove the inside door handle. Refer to”InsideDoor Handle” in this section.4. Remove the door seal trim.
