9P – 24IDOORSDAEWOO V–121 BL42. Connect the electrical connector.3. Install the rear door glass. Refer to Section 9L,Glass and Mirrors.4. Connect the negative battery cable.MANUAL REAR WINDOWREGULATORRemoval Procedure1. Remove the regulator handle. Refer to”ManualRear Window Regulator Handle” in this section.2. Remove the rear door glass. Refer to Section 9L,Glass and Mirrors.3. Remove the nuts and the window regulator.Installation ProcedureNotice : Dissimilar metals in direct contact with each othermay corrode rapidly. Make sure to use the correct fasten-ers to prevent premature corrosion.1. Install the window regulator with the nuts.TightenTighten the window regulator nuts to 8 Nm (71 lb–in).2. Install the rear door glass. Refer to Section 9L,Glass and Mirrors.3. Install the regulator handle. Refer to”Manual RearWindow Regulator Handle” in this section.