Dahua DHI-ARC3008C Installer Manual

Also see for ARC3008C: User manual

Contents

Dahua DHI-ARC3008C Installer Manual Manual pdf 26 page image

Alarm Control Panel Installer Manual25Icon Color MeaningRed Fault statusGreen BypassRed Alarm status of eight Areas1.16.2 StatusPower LED Indicator ( ) Glows: The system operates with normal power supply. Slowly flashes: The system does not operate normally due to a lack of power supply, and therefore acheck must be given. Quickly flashes: The system is in installer programming mode or in the Walk Test Zone mode. If alack of power supply occurs when the system is in either of these two modes, the LED indicator alsoquickly flashes.Battery LED Indicator ( )If power supplies normally, the indicator will not be ON in case of low battery. Slowly flashes: Battery defects such as low power and powering off quickly. Off: Battery operates normally.Fault LED Indicator ( ) Glows: System faults (main power loss, battery low voltage or missing), and you can view the detailson the SYSTEM TROUBLES menu of User Menu. Slowly flashes: Tampering is happening to the Control Panel, siren, or Keypad. Off: The system operates normally.Bypass LED Indicator ( ) Glows: There is at least one bypassed zone. Off: There is no bypassed zone.1-8 LED IndicatorsThere are eight LED indicators located below the LCD display represent the status of the Areas. From leftto right they show the alarm status of Area 1 to Area 8. See Figure 1-12.Area status LED indicatorsFigure 1-12