Alarm Control Panel Installer Manual58Submenu SettingEXPIRYThis function is supported only when the SIM TYPE is set to CONTRACT inthe COMMUNICATIOR menu.Set the expiration date of the SIM card installed in the GSM telephonecommunicator.It is suggested to set a minimum period of 10 days before the realexpiration of the SIM card so as to have adequate warning time torecharge it and extend its validity.At the set date, the failure status LED indicator will light up. Ifprogrammed, SMS can be sent to external telephone number. Auxiliaryoutputs can also be activated for connection to local devices.Press to return to the DATE/TIME menu.Step 4Then you can press and to move to the next menu or press to exit from theInstaller Menu.HOLIDAY1.33The HOLIDAYS menu is used to set the holidays for the year when the Timers will not have any effect onarming and disarming, or need to completely block user code working and outputs.You can program up to 20 holiday periods.After entering the Installer Menu, press and to scroll up and down until you reach theStep 1HOLIDAY menu. See Figure 1-30.HolidayFigure 1-30Press to enter the programming mode.Step 2Press and to select the holiday that you want to configure, and then press .Step 3The holiday time setting interface is shown. See Figure 1-31By pressing + 2, you can enter the EDITING mode for changing the description of holiday.Holiday timeFigure 1-31 1: Holiday start day 2: Holiday start month 3: Holiday end day