Dahua DHI-ARC3008C Installer Manual

Also see for ARC3008C: User manual

Contents

Dahua DHI-ARC3008C Installer Manual Manual pdf 9 page image

Alarm Control Panel Installer Manual8 Supports abnormality alarm, including network disconnected alarm, PSTN fault alarm, tamperingalarm, low battery alarm, battery loss alarm, power loss alarm, and keyboard faults alarm. In-field firmware upgradable. App-based system control through DMSS.Terms and Definitions1.3Refer to the terms and definitions that are used in the Manual as below.Table 1-1 Terms and definitionsTerm DefinitionArea The 8 Areas that can be armed.Zone Protection zones under Area.Partition The scope of Partition is larger than Zone and under Area.Numeric key Key 0–9 on the Keypad.Function key The other keys except Numeric keys, such as ESC and ENTER.Key combination + Numeric key.User Menu Menus programmed by the User.Installer Menu Menus programmed by the TECHNICIAN.Access Code A specified code, from 4 to 6 digits, that allows the user to operate theKeypad.TECHNICIAN A person that is authorized to access the Installer Menu to programthe system.1EOLThe detector type can be NO or NC, and returns two status: Normaland Alarm (short circuit and broken circuit are considered to be Alarmstatus).2EOL The detector type can be NO or NC, and returns four status: Normal,Alarm, Tamper, and Short Circuit prevention.3EOL The detector type can be NO or NC, and returns five status: Normal,Alarm, Tamper, Anti-masking, and Short Circuit prevention.