Dahua DHI-ARC3008C Installer Manual

Also see for ARC3008C: User manual

Contents

Dahua DHI-ARC3008C Installer Manual Manual pdf 60 page image

Alarm Control Panel Installer Manual59 4: Holiday end month 5: Holiday yearType in the value and press to confirm the setting, or press and to change theStep 4value, and then move on to the next field.Press to return to the holiday selection menu.Step 5Then you can continue with programming other holidays, or press to return to the HOLIDAYmenu from where you can press and to move to the next menu or press to exitfrom the Installer Menu.To delete a Holiday, on the Holiday selection interface where the Holiday name is shown, pressand hold for at least three seconds.TEL NUMBER1.34The TEL NUMBER menu is used to set the telephone numbers that will be used by the 2G/4G module forvoice calls and/or SMS.Up to 8 different telephone numbers can be programmed for voice calls and remote control by dialing, 8numbers for SMS and remote control by SMS. The same telephone number can be used for a differentnumber of voice calls/SMS (such as alarm, robbery, and 220V AC failure).After entering the Installer Menu, press and to scroll up and down until you reach theStep 1TEL NUMBER menu. See Figure 1-32.Tel numberFigure 1-32Press to enter the programming mode.Step 2There are three options: TEL NUM, SMS NUM, and SIM NUM. Press and to alter theoptions. TEL NUM1) On the TEL NUM submenu, press to enter the interface from where you can select atelephone number that you want to program by pressing and .2) After selecting a telephone number, press to enter the programming mode.3) Configure the telephone number settings. See Table 1-28.