X64-AN Quad User's Manual Technical Reference 59Camera Power SourceCamera power via Hirose connector, +12 V @ 500 mA, fused protectedBoard Power Requirements+3.3 Volts: 2.62A (standby) – 2.74A (during acquisition) typical+5 Volts: 330mA typical+12 Volts: 150mA typical-12 Volts: 120mA typical-5 Volts: not usedCamera CompatibilityGo to the Teledyne DALSA Camera Database web page for the latest camera information at[ http://www.teledynedalsa.com/mv/support/support.aspx ].Host System RequirementsThe X64-AN Quad requires at minimum an Intel Pentium III or compatible computer system with afree PCI-32 or PCI-64 local bus slot supporting the PCI 3.3 volt specification.Operating System SupportEither 32-bit or 64-bit versions of Windows XP, Windows Vista and Windows 7X64-AN Quad Physical DimensionsConforms to PCI full length PCB; approximately 12.25" W×4.125" H (31 cm W×10.5 cm H)EnvironmentAmbient Temperature: 0° to 55° C (operation)-40° to 125° C (storage)Relative Humidity: 5% to 95% non-condensing (operating)0% to 95% (storage)
