X64-AN Quad User's Manual Technical Reference 61X64-AN Quad Connector and Jumper LocationsConnector ListDescriptions for connectors and status LEDs follow the X64-AN Quad component layout drawings.Connector Description Connector DescriptionJ5 DB9 – External Signal & Triggerinputs (see “J5 – Trigger SignalsConnector” on page 65)J17 PC power to camera interface(see “J17: Power Connector” onpage 69)J6, J7 Connectors for Hirose inputmodule assemblyJ15 Normal Operation (jumper on)Safe Start Mode (jumper off)(see “J15: Boot Recovery Mode”on page 70)J8, J9, J10, J11 see “J8, J9, J10, J11: Input LowPass Filter Select” on page 65J21 Memory module socketJ19 Strobe outputs and Serial Ports(see “J19: Strobe & Com Ports”on page 69)J16 X-I/O Interface using cableOC-IO0C-ANLVDSD13, D14, D15,D16Input Status LEDS(see “Acquisition Status LED”on page 67)J13, J18, J22 Reserved
